RAYMARINE ST60 PLUS COMPASS SYSTEM
The ST60+ Compass System provides accurate magnetic heading and course deviation information on a combination analog and LCD display. Offering 3 levels of backlighting on the LCD and dial, as well as superior contrast and visibility, the ST60+ Compass instrument can be easily seen day or night. The instrument is constructed in a rugged, waterproof case to provide reliable performance, even under the most demanding conditions.
The ST60+ Compass Display receives heading data either from a connected fluxgate compass transducer or via SeaTalk networking from other onboard data sources like an autopilot system (repeater mode.) Additional ST60+ Compass displays can be added wherever needed simply by connecting them to the SeaTalk network and configuring them as repeaters. The ST60+Compass system can also be installed as a stand-alone device independent of other onboard systems. Raymarine ST60+ instruments offer convenient and flexible mounting configurations. Out-of-the box each ST60+ device can be attractively surface mounted right onto your console, dashboard or bulkhead. Using the optional flush-mount kit (A25003-P) ST60+ instruments can be low-profile mounted, matching Raymarine C-Series, E-Series and G-Series multifunction and marine displays. For installation on a table-top or from the overhead use the optional ST60+ bracket mounting kit (E25009.)
The ST60+ Compass instrument provides compass heading, shown in digital form (numerals) plus, when in locked heading mode, steering course error to +/- 30º deviation of locked course heading, shown in analog form by the pointer. The ST60+ Compass Instrument can also display Course-Over-Ground (COG) when interfaced with a SeaTalk GPS receiver as well as average heading.
The ST60+ Compass System comes with display unit, fluxgate compass transducer, sun cover, SeaTalk and power cables, surface mount kit and complete instructions.
- Currrent, locked and average heading displays
- Magnetic or true hading readout
- Course Over Ground (COG) display when connected to SeaTalk GPS source.
- Adjustable display response.
- Standard surface mount kit included, optional flush or bracket mounts available.
- Intuitive 4-button control layout.
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders.
- Compatible with the wireless SmartController autopilot control and instrument repeater
| Power |
| ||Nominal voltage (volts DC) ||12V systems || |
| ||Absolute voltage range ||10 ? 16 volts || |
| ||Power consumption (typical) mA ||65mA || |
| Physical |
| ||Overall dimensions (WxHxD) mm (standard bezel) ||110x115x39 || |
| ||Mounting methods ||flush/surface/bracket || |
| ||Control type(s) ||4 backlit buttons || |
| ||Display size and type ||34mm segmented LCD & pointer || |
| ||Maximum character size ||13mm || |
| ||Display lighting ||3 levels plus off || |
| Connections |
| ||SeaTalk ||2 connections || |
| ||NMEA input and output (0183) ||option via E85001 || |
| ||PC (RS232) and RayTech interface ||option via E85001 || |
| Approvals |
| ||EMC (Europe and FCC) ||Yes || |
| ||CE marked ||Yes || |
| Environmental |
| ||Operating temperature range ||-10°C to +70°C || |
| ||Non-operating temperature range ||-20°C to +70°C || |
| ||Humidity ||up to 95% || |
| ||Waterproofing standard ||IPX6 & CFR46 || |
| Display Pages |
| ||Heading Data ||Current, locked, average || |
| ||Heading readout ||Degrees magnetic or true || |
| ||Course Over Ground ||Yes ||When SeaTalk GPS is available. |
| Additional Features |
| ||Soft Power Down ||Yes || |
| ||Adjustable Display Response Time ||LCD and pointer |